IH 2404 Industrial Disc Brakes

Posted by Tim/Ohio on August 07, 2004 at 18:36:31 from (206.148.92.20):

I just purchaced a 1961 (?) 2404 IH with a front end loader. I'm in the process of fixing all those "little" things that are wrong when you buy an old tractor. It has disc brakes with 2 discs on each brake shaft. They are worn were the "bars" in the discs are bearly visable. I cleaned every thing up and adjusted them up so I had pedal (with the help of a few shims), but I still can only get a small hint of brakes. Does anyone know how thick a new disc is?? It seems like that is the problem, but my experiance has always been that if you have any lining, and can get pedal, you should have some brakes.

Follow Ups:

• Re: IH 2404 Industrial Disc Brakes Chris Brown 19:02:24 08/07/04 (2)
  • Re: IH 2404 Industrial Disc Brakes Tim/Ohio 19:20:17 08/07/04 (1)
    • Re: IH 2404 Industrial Disc Brakes CHris Brown 06:48:58 08/08/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]