Re: metal parts in oil of MD

Posted by riverbend on July 30, 2004 at 21:40:21 from (208.160.33.197):

In Reply to: metal parts in oil of MD posted by TIm on July 29, 2004 at 17:28:33:

How is your oil pressure ? The broken gear teeth do not sound good.

My H has screen over the oil pump pick up. It would be hard for any good sized piece to get in. The oil ways are fairly small, so it would be hard for any size chunk to circulate and drop into the oil pan.

The best diagrams are in your parts book. Either you can run it until it blows up or you can take the motor apart and have a look. Taking it apart now will be far cheaper than letting it blow.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]