Re: High Gear not staying engaged on 806

Posted by Pa on July 23, 2004 at 07:04:46 from (65.171.201.121):

In Reply to: High Gear not staying engaged on 806 posted by Matt on July 23, 2004 at 06:22:12:

The problem is under the shift plate that is located infront of the seat under your platform. There is a shifting plate that is worn. Very common with the '06 series. Not to difficult to get at. Be sure to replace the plate as well as the rollers under it that ride in the groves, and the bushings on the forks when you have it apart. While you are in there it doesn't hurt to check the shift collars to see how worn they are as well. I have done this job many times and it will go back togther easier if you note the position of the plate and forks during disassembly. Itr takes a little jockeying but it should fall in place easily. Good Luck

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: High Gear not staying engaged on 806 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]