Re: Fuel Guage on a 806

Posted by Allan in NE on July 22, 2004 at 16:04:58 from (148.63.132.164):

In Reply to: Fuel Guage on a 806 posted by Marty Peru on July 22, 2004 at 14:48:03:

Hi Marty,

Just repaired one; they are the simplest repair ever: Unplug the 2 wires at the sender and take out the 5 little screws holding the sender into the tank (after you remove the hood, of course).

But first, to test the sender, take the sender wire (not the ground wire) and ground it. The gauge should then go to full. Likewise, an open circuit on this wire should produce an empty reading on the gauge.

Hope this helps,

Allan

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Fuel Guage on a 806 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]