Re: Re: Re: Re: '47 H gas-only Distributor shaft p

Posted by Dave in CT on July 12, 2004 at 08:44:50 from (64.252.221.173):

In Reply to: Re: Re: Re: '47 H gas-only Distributor shaft plate posted by Stan(VA). on July 12, 2004 at 07:28:07:

Thanks for posting the pic. I was expecting a slot instead of a hole. Would you measure the diameter of the hole the cylinder under the cam fits into? Eventually I'll nead a tracing of the plate to locate where the hole is in relation to the raised lines the weights sit on, the pins, etc. Thanks for your help with this.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: '47 H gas-only Distributor shaft p Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]