Re: Re: My Farmall H need more RPM, HOW?

Posted by ChadS on July 11, 2004 at 07:29:31 from (66.228.96.198):

In Reply to: Re: My Farmall H need more RPM, HOW? posted by Wayne Swenson on July 10, 2004 at 21:30:40:

It can be a bit shorter in length,, you need a bigger diameter wire size than the OEM spring to get what you are looking for. Sure we have springs for this, and they work very well, you can get 20 percent over rpms,, just back the high speed adjustment inside the governor to set rpm. Also, you should be able to back the high speed adjustment bolt inside the housing to get 10 over rpm, should be enough there to increase it, but soon, you will stretch that spring. [email protected] for more info! ChadS

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: My Farmall H need more RPM, HOW? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]