544 C-200 water pump

Posted by Kent on July 09, 2004 at 20:45:30 from (12.214.34.211):

I am still itrying to get the rebuilt C-200 ready to put back in. I noticed the new waterpump from NAPA had a threaded hole for the bypass. Upon further inspection it is a blind hole??? Is this a newer design?? It seems to me I would need the bypass to prevent hot spots, cavation or air lock. Do you think I should drill on an angle into the impeller area?? Any ideas?? Thanks, Kent

Follow Ups:

• Re: 544 C-200 water pump Hugh MacKay 16:01:32 07/10/04 (1)
  • Re: Re: 544 C-200 water pump Kent 19:51:03 07/10/04 (0)

Post a Followup Name: E-Mail: Subject: Re: 544 C-200 water pump Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]