Re: Farmall Hydraulic Cylinders

Posted by Bruce Wa. on June 29, 2004 at 19:15:40 from (67.40.195.36):

In Reply to: Farmall Hydraulic Cylinders posted by JohnG(TX) on June 29, 2004 at 13:50:16:

The cultivator cylinders are all the same . Don't know about the middle buster. The delayed drop feature of the rear cultivator is built into the liftall on the rear outlet on the left side. Push the control part way for the fronts to drop then push all the way for the rear. The delayed raise was created by putting a special fitting/valve in the line to the rear cylinder. They still work perfectly fine without this. The fitting was made of cast iron and we dropped and broke ours years ago. Just ran thru 7 acres of corn with my 2 row on the H today(tues). Works great.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Farmall Hydraulic Cylinders Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]