Re: IH Grain Drill HELP!!!!!!

Posted by TDK on June 25, 2004 at 17:41:33 from (205.188.117.22):

In Reply to: IH Grain Drill HELP!!!!!! posted by Chuck McDonald on June 25, 2004 at 05:48:20:

(1). Sounds like you have an 18 X 7 MF Double Run drill. I'm relying on what info I can get from the parts manual. They were built between '49 and '57.
(2). Manual shows the reducers you refer to. Grain Cup Reducer, part # NA 2 563. Have no idea where you might find them. Doubtful if dealer can get them anymore, although it won't hurt to ask.
I only have the parts man. on hand right now. Also have operators man. that may lend some needed info. If your interested in more info, send me an e-mail by clicking on "send e-mail" above, and I'll get the op. man. We also have a "junked" drill like yours, if you need anything.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: IH Grain Drill HELP!!!!!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]