|
Farmall & IHC Tractors Discussion Board |
ih 606 fork lift.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by elwood on June 24, 2004 at 04:26:09 from (24.213.214.193):
i just got a 1963 model 606 tractor that was turned in to a forklift by reverseing it around. made by the TRAC-PAVE COMPANY in nunda ny. very nice shape and runs very well. power steering. has cab but it was put on afterwards. only shows 689 hours on working hour meter. all gears work good. good clutch. has 24 in rubber not matching but very good. it seems to lift alot.sheet metal is perfect.no fenders. it has 2 flat plat forms over tires. still has pto shaft. hydrolic clutch. breaks do not work yet. no leaks. i was wondering a value so i can sell as its to big for my needs. chargeing system works and all factory gauges includeing the tack and hour meter are almost perfect shape and working. i need a smaller one. thanks for all the info. serial number is 2702 makeing it a 1963 model.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
