Re: Re: Re: noisy 1066

Posted by Allan in NE on June 17, 2004 at 05:32:28 from (148.63.132.164):

In Reply to: Re: Re: noisy 1066 posted by Dan on June 16, 2004 at 20:35:49:

Dan,

Jim J. has a point.

Are you talking about that high pitched "rapping" sound when you first start it? The sound is akin to that of a ball-peen hammer rapping on a large anvil?

If that is what you mean, then that is completely normal for a direct injected engine. In fact, those old 360s & 414s were nortorious for that noise.

Also, many times they will make this sound after they have been pulled real hard for a long time, are good and hot and then allowed to set & idle.

My wife used to always bring my breakfast out to the field during spring work, I would just let the thing set there and idle while I ate. At 7am, it was still relatively quite in the countryside save for that tractor setting there "rapping" at idle.

Just guessing,

Allan

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: noisy 1066 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]