Re: sediment bowl assembly (on Farmall M)

Posted by Dave in CT on June 11, 2004 at 12:11:03 from (64.252.221.132):

In Reply to: sediment bowl assembly (on Farmall M) posted by William Ransom on June 11, 2004 at 11:55:41:

Well, like Nebraska Cowman said, the metal is aluminum or pot metal so it can get ruined when you remove it. One reason I didn't remove mine is because I thought I'd wreck it or the port it screws into. I'd try flushing it AND go buy a magnet to get more of those flakes before trying to remove it. All my experience is with an H gas tank, which doesn't have baffles. Nebraska Cowman said there were baffles to the M tank so you may not be able to get at those sections with the magnet. If you take the glass bowl, screen and gasket off the bottom, can you get it to give you a good stream of gas? Does that carry some of the stuff that's blocking it out? If so, repeated flushings couldn't hurt - filter the gas before you put it back in the tank.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: sediment bowl assembly (on Farmall M) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]