Re: farmall h questions

Posted by nebraska cowman on June 06, 2004 at 17:35:10 from (65.172.142.232):

In Reply to: farmall h questions posted by Mike on June 06, 2004 at 16:08:03:

"speedy sleeve" ask about it where you get the seals. You will likely have to make your own gaskets. Get gasket paper at any auto parts store. rough cut the paper and lay it on the casting you want to seal. with a light hammer you can tap around and the sharp edge will cut the gasket in mirror immage. use the round end of a ball peen hammer to locate the bolt holes and a light tapping will cut the holes too. You're welcome.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: farmall h questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]