Re: Re: Smoking Light Switch

Posted by Jeff_MI on June 05, 2004 at 07:28:41 from (24.247.143.159):

In Reply to: Re: Smoking Light Switch posted by john *.?-!.* cub owner on June 03, 2004 at 19:56:40:

BN switch: the resistor smokes on low. Otherwise the switch is fine.

Cub: The switch itself smokes when the fuse is connected. I'm drawing 2 amps with the switch off (the lights also come on); 2.6 A with the switch on low. I think there may be some corrosion inside that's causing a resistive bridge. Disconnecting the lights drops the current to 0. They are 6 volt lights on a 6 volt system.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Smoking Light Switch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]