Re: Radiator gasket sealer

Posted by kfox on June 04, 2004 at 21:10:30 from (67.241.33.161):

In Reply to: Radiator gasket sealer posted by Mike on June 02, 2004 at 19:36:11:

What kind of gaskets are you using Mike? I rebuilt a few F-20 radiators several years ago and I used cork gaskets and old fashioned gasket shelac. I couldn't get cork gasket material long enough to make one piece gaskets, so I just cut joints at a forty-five angle. Made the bolt holes a bit small, and everything a close fit. Also, do you have the sheet metal pieces with the bolt holes in them that go on the outside of the flanges? The cork seemed to be thick enough to compress some when the sides were bolted on the top & bottom tanks. Hope you have good luck with your 20. Ken

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Radiator gasket sealer Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]