Re: IH 140 rock shaft.

Posted by Randy in NE on June 02, 2004 at 11:34:06 from (216.58.237.20):

In Reply to: IH 140 rock shaft. posted by David on June 02, 2004 at 10:03:33:

Looking at the parts diagrams for the 140 and my C it looks like it is a tapered fit. There is a half-moon key on the shaft. The rockshafts are a little different between the 100/130/140 and the C but basically it looks like they are put together the same. Like you said, there probably isn't a good place to get a puller on there. Mayby a little pressure on the rockshaft and then a little tap on the end of the shaft. Gentle persuasion would be the key word.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: IH 140 rock shaft. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]