How to remove those stuck wheel weight bolts.

Posted by Kevin in Va. on June 01, 2004 at 05:55:05 from (66.207.69.15):

I've been having a problem removing a wheel weight bolt on the front of my Super-A. Basically, the square bolt head just spun around and around in the depressed seat. Guess that either bolt head was a bit to small or the cast seat was a tad too large! Anyway, the solution was to cut some small steel shims from some scrap and wedge them all in real good to remove the play and not give the bolt any turning room. This worked like a charm! Had the bolt off in no time. Also had to use this technique on a rear wheel where a pervious owner used a hex instead of a square headed bolt to secure the wheel to rim. Hope this helps somebody out.

Follow Ups:

• Re: How to remove those stuck wheel weight bolts. rustyfarmall 09:39:42 06/01/04 (0)

Post a Followup Name: E-Mail: Subject: Re: How to remove those stuck wheel weight bolts. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]