Farmall & IHC Tractors Discussion Board |
Slack in Steering Gear - Super A
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Pat Rivers-Bowerman on May 28, 2004 at 07:12:21 from (207.179.180.41):
1952 Farmall Super A [it's Wide Front End] I have about one-quarter turn play in the steering wheel, chasing the front wheels. Shaking the steering wheel shaft, there is sideways play plus rain busily runs down into the steering gear unit and dilutes the oil. I see there are 2 pre-sized bushings - one for the worm shaft and the other for the [vertical] sector shaft. a. Are these bushings still available? b. Would changing the bushings [plus accompanying seals for the rain] fix the slack steering problem? Manual says Steering Gear Unit can be overhauled without having to prop up engine and remove entire front end. Otherwise, it is that major operation and carry the Unit down to my Friendly Local Machine Shop. The "Search" function is down for maintenance, so I may be repeating an existing Discussion Post. Thanks in advance, for your help. Pat from New Brunswick
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|