Re: Re: H head gasket

Posted by LC on May 26, 2004 at 16:15:43 from (12.159.33.19):

In Reply to: Re: H head gasket posted by Allan on May 26, 2004 at 12:55:36:

H's generally have low compression all gas heads on them that have huge combustion chambers. This leaves lots of room for domed pistons. If you remove your sparkplugs and look into the cylinder while rolling the motor over by hand you will see that there is lots of clearance from the piston to the valve. Also, the valves start closing before the piston ever reaches Top Dead Center. If you really think it is the valves check to see if you have a weak spring or a gummed up valve that is not seating home as quickly as it should. If your engine still has lots of power and does not miss at the high rpms then the valves are not the problem

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: H head gasket Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]