Re: H and 350 transmission bearing interchange

Posted by Wardner on May 06, 2004 at 15:22:07 from (4.138.241.29):

In Reply to: H and 350 transmission bearing interchange posted by Gary on May 06, 2004 at 05:14:02:

Seeing as no one has answered I'll take a stab at this.

The countershaft is different because it is hollow. The clutch gear (sometimes called input) is different because of the TA. Don't know about the main shaft. Some of the gear ratios are different. I am guessing that some of the bearings might interchange. It is hard to figure out interchangebility because the later tractors used a different part # system. A salvage yard operator would know. Call Mike Bunck at 785 548 7437.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: H and 350 transmission bearing interchange Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]