Re: M Boster removal

Posted by 49 Cubber on April 28, 2004 at 19:11:35 from (206.74.216.156):

In Reply to: M Boster removal posted by Paul G. in Mn on April 28, 2004 at 17:46:55:

I wouldnt,might damage the rad.Ms are easy to get off,Hs are somewhat of a pain.On the M there are two holes in line with the two studs for the rad.Remove those,the hoses amd if yours has the round bar from the rad to the steering support,remove that.You CAN get the rad and shround around the fan but its tricky,so I always take the shroud off of the rad before pulling it out.I have goten "lucky" and both studs on the rad came so I didnt need to take the shroud off.Your results will vary!Good luck!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: M Boster removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]