Re: Hyd. on 1956 400 LP

Posted by Wardner on April 28, 2004 at 12:10:22 from (63.159.104.18):

In Reply to: Hyd. on 1956 400 LP posted by Mike on April 28, 2004 at 07:28:17:

This is why you need a parts book. I am assuming that the PS is stock but the flow control valve was changed out. The valve is located on the left hand side of the hydraulic valve area in front of the dash. One valve was made for non-PS tractors and the other has a circuit for the PS. The latter valve has a few vital parts that go with it. One of those is a metal U-shaped pipe.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Hyd. on 1956 400 LP Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]