SMTA hydraulics for show not for work!

Posted by Kevin on April 26, 2004 at 20:08:47 from (66.186.75.24):

I have a smta and I don't need the hydraulics to work just look good.I would also like to take out the top driven gear.Now the little springs that keep the pessure on the bearings against the gear,do I really need the put the springs back on the bearing side that I took the gear out of? Just thinking that I don't want to put pressue against the bearing that has no gear there.I'm also scared that the pressure with make the bearing bind with the gear.Any help is appreciated.

Follow Ups:

• Re: SMTA hydraulics for show not for work! Farmallkid 12:46:21 04/27/04 (0)
• Re: SMTA hydraulics for show not for work! Randy in NE 04:18:26 04/27/04 (0)

Post a Followup Name: E-Mail: Subject: Re: SMTA hydraulics for show not for work! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]