Re: snow blade

Posted by Rudi on April 24, 2004 at 09:44:54 from (69.195.158.20):

In Reply to: snow blade posted by Dave A. on April 24, 2004 at 09:29:04:

Dave:

Click on the Cub Manuals Link below, then on Implement and Part Sketches. Then on Rudi's Snow Plow.

This plow that I use on my Cub was originally built for an A/SA. It is a perfect fit and works very, very well.

If you click on the Cub and Implement Gallery you will be able to see how the plow is mounted to Ellie-Mae as of last year. For this season, I repainted the plow yellow, and the snow no longer sticks to it. I will upload those pics sometime this week.

I would substitute square tubing for the round pipe stock as it is easier to weld and align.

I think this could be built for about $50-$60 in material if used steel is used and probably about $100 is new.

Hope this helps

• Cub Manuals

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: snow blade Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]