Re: Battery Cables

Posted by Hugh MacKay on April 19, 2004 at 15:38:24 from (209.226.106.45):

In Reply to: Battery Cables posted by Cmore on April 19, 2004 at 12:01:48:

Cmore: The place I find the very best are repair shops for heavy trucks. I bought wire from them bulk last year complete with solder on ends. These products are real nice to work with. You just cut the wire to length, cut the wire covering back far enough so bare exposed wire will fit in the end. Put on a good coating of solder paste, put the end in a vise, install the wire, heat the end until the solder melts into the sleeve of the end. I used to have them make them for me and last year when I was there, he was busy, and not going to be able to get to for awhile. He said, " You can make these up." I did and now I know how well he was getting paid for his time.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Battery Cables Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]