|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Farmall C, hyd fluid filling oil pan o
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on April 17, 2004 at 20:17:17 from (207.178.96.214):
In Reply to: Re: Re: Farmall C, hyd fluid filling oil pan on en posted by Lee on April 17, 2004 at 18:11:46:
IH used Pesco and Thompson pumps. In your case, I don't know if that's important if you only need a seal or an o-ring, as a bearing/seal place can match it. O-rings can be found about anywhere. There is a repair kit for the Pesco pumps, but the Thompson parts are ordered separately. Since you have to take the pump off anyway, see if it has a seal or an o-ring, if a seal the IH number is 353 183 R91, Pesco and Thompson use the same seal. For the Pesco pumps #'s 051012-020-01 thru 051012-020-07; and 051012-024-05 thru 051012-024-07 -- the IH repair kit number is 355 207 R91. Ask your Case-IH dealer to verify these numbers in case I made a mistake.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Horsepower Defined - by Staff. Indicated Horsepower This represents the power developed in the enine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful hor
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
