Re: magneto timing trouble

Posted by John on April 14, 2004 at 18:41:12 from (192.233.162.139):

In Reply to: magneto timing trouble posted by Jeff on April 13, 2004 at 20:50:25:

I am not a mechanic but what I would do is first mark the roter to where it is in relation to which cylinder it it on then mark the mag ( on top where it bolts to the tractor) so you know where the correct mag timing position is. Next, take the mag off, mark the grove on the mag to the mag housing then mark the other grove end that is still in the tractor to the housing. In theory everything should line up when assembling. The part that I am not sure of is there is a bushing that has to be replaced then correctly reamed to the drive shaft.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: magneto timing trouble Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]