Re: loose wheels on an H

Posted by Hugh MacKay on April 14, 2004 at 18:01:42 from (209.226.247.73):

In Reply to: loose wheels on an H posted by riverbend on April 14, 2004 at 17:39:27:

riverbend: Did you ever try putting in new bolts? Be rather careful, as those tractors will shear the key in the wheel. My dad's 300 did that the week was new. Dealer had changed the wheels from dish in to dish out and I expect someone forgot to tighten the clamps as tight as they should be. You can put quite hefty torque on those as they are fine thread. I have used 3/4 drive with about 4' pipe on the handle.

Could it be that someone has changed those bolts? I expect they were a grade eight bolt when new.

Follow Ups:

• Re: Re: loose wheels on an H Angle iron 05:48:02 04/15/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: loose wheels on an H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]