Re: Re: A won't start...

Posted by colin.c. on April 10, 2004 at 20:52:45 from (161.184.200.179):

In Reply to: Re: A won't start... posted by Stan(PA) on April 09, 2004 at 05:07:10:

glad to hear that you got it going.have been working on a W-4.have had that same problem.it won't hurt your engine to throw in a pint of atf or 2 cycle oil to help clean up the carb.it might smoke a little,but that's ok.one other thing that i found is that if the plumbing is'nt sealed good between the carb and the intake manifold,it has trouble drawing the fuel/air mixture into the cylinder.found out the hard way that when you put in new manifold gaskets,mating surfaces have to be spotless.threw that in just in case you ever have to go that far with it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: A won't start... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]