|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Greg on April 08, 2004 at 09:07:07 from (4.227.120.63):
In Reply to: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re posted by jdemaris on April 08, 2004 at 07:07:27:
I haven't run any real large machines with hydrostat drive but I've run a "newish" JD 6300 mowing hay with a 8-9' rotary hay cutter. Obviously, the tractor wasn't having to truly "pull" a heavy load, but the mower kept the engine loaded pretty heavy. Hydro works great for this. Very easy on the operator, smooth and an infinite source of gear ratios to a point. But if the tractor was mine I would really hate to slam a disc deep in the ground and pull it to death. Just don't see how that hydro unit will live. Although almost every dozer I've ever run was 100% hydro as well as maintainers. That's a good argument for how reliable they can be. But I'm just scared of them. I'll stick with gears meshing on my equipment.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
