Re: Do I need to adjust my valves on an H?

Posted by Ron on April 03, 2004 at 07:23:37 from (152.163.252.227):

In Reply to: Do I need to adjust my valves on an H? posted by John on April 02, 2004 at 15:11:48:

The problem with smaller tappet clearances is with the "Seat Timing" of the valve..
The closer the tappet clearance, the LESS time the valve has to COOL..!!
This is called "Tight Valves"..!!
Valve tapet clearances get tighter, as the engine warms up (in most push-rod engines).
Cold, you should set them a couple of thousanths looser..

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Do I need to adjust my valves on an H? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]