Re: Help identify M carb

Posted by Theman on March 30, 2004 at 07:11:50 from (65.248.77.5):

In Reply to: Help identify M carb posted by MM on March 29, 2004 at 12:19:11:

The ID tag is a little brass ring the size of a #6 flat washer. It is held to the carburetor housing by a rivet through its center. It is visible in your photo between and slightly to the right of the idle mixture and speed adjusting screws. Being brass, don't use a screwdriver to scrape the paint off of it. You could render the stamped numbers unreadable. I have had success removing the paint by soaking part of a paper towel with carb cleaner and dissolving the paint over the tag. Rub gently and use latex gloves.

Follow Ups:

• Re: Re: Help identify M carb MM 08:36:00 03/30/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: Help identify M carb Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]