Re: Need opinions on long axles on 1066

Posted by mikeinmo on March 24, 2004 at 17:46:21 from (208.31.189.242):

In Reply to: Need opinions on long axles on 1066 posted by Mitchissippi on March 24, 2004 at 08:25:28:

Maybe you like wrenching more than I do. We have cut several axles on IH's around here. We use a "quickie saw". Gas powered abrasive cut off saw that we use on the job site. Find someone with one of these or rent one, maybe you have one. Get a few blades for cutting steel, not the concrete blades. Takes about one blade for each side. Make a good square cut and then bevel the end with a grinder, add a little black paint and it'll be hard to tell it was ever cut. I have cut four or five sets for neighbors and don't know of any problems from this. Good Luck.

Follow Ups:

• Re: Re: Need opinions on long axles on 1066 Mitchissippi 20:47:32 03/24/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: Need opinions on long axles on 1066 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]