Re: IHC 354 brakes - leaking shaft seals

Posted by NC rick on March 17, 2004 at 19:08:56 from (68.119.210.177):

In Reply to: IHC 354 brakes - leaking shaft seals posted by SgtStew on March 17, 2004 at 18:24:15:

I hate to be the bearer of bad news but you can't get at those seals without removing the hydraulic reservior and rear axles. I am in the middle of doing the same thing on my B-275 right now. I would not reccomend starting a job like this without an I&T or IH service manual.

If you don't get to replace the seals there is a hole for the gear oil to drain out of it gets past the seals. You may want see if it is plugged with crud. It was on mine.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: IHC 354 brakes - leaking shaft seals Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]