Update on 300U steering problem

Posted by Dennis on March 14, 2004 at 17:02:13 from (152.163.252.227):

I have been having a steering/wobbly wheel problem lately and several of you have been very helpful with comments.

Here is what I found. I was all set to take off the steering box today and see what was wrong, and had one heck of a time getting her in the garage as she would not turn right at all, and barely left. When I had taken the sheet metal off and was about to pull the gas tank, I decided to pull the steering wheel first. All the splines on the steering column were worn to nothing and the wheel was just spinning under the nut!! Boy was I happy that I did not have to pull the gas tank. I drilled some holes in the wheel base and attached the wheel with 3 allen head screws. I was so happy I went out and raked the pasture for 2 hours!! It was a nice day in Florida. Thanks for all your help.

The wheel bearings get changed soon too!

Follow Ups:

• Re: Update on 300U steering problem TDK 21:19:40 03/15/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Update on 300U steering problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]