Farmall & IHC Tractors Discussion Board |
Re: M or SM
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tim Malin on March 11, 2004 at 09:32:12 from (207.190.66.214):
In Reply to: M or SM posted by Brian on March 11, 2004 at 03:54:59:
I agree with Mike. I am the proud owner of a Super M, and the brakes were shot when I bought it. If the actuators are okay, they are simple to replace brake pads, but the tractor must be used a minimum once a month otherwise the actuators lock up and then rust and then you have a lot of pedal movement and not a scratch of brake pressure. I had the opportunity to find a pair of nearly brand new actuators in my great uncle's shed in a box that came with his 450. Sold the 450, didn't have a machine that used these brakes, and gave them to me. New pads, new actuators, new tractor. Only true problem I've had. If it has good brakes, use them to keep them in good shape, and perhaps (although ungodly expensive) buy some new pads (they're actually brake plates, when you look at them) and replace the pads, and while you have them apart you can tell if anything is bad. Actuator springs and balls wouldn't be a bad idea, either. The actuator has balls in the middle of it, and springs on he outside. Using a screwdriver as a lever, replacement is easy. The balls will become heat stressed and turn blue, and sometimes rust will pit them and they will work like crap. The actuator may actually be cracked, but if you don't use it as a main farm tractor the largest crack may last 15 years without hampering brake performance. Any other questons ask, because I have been through nearly every nut and bolt on the tractor outside of the transmission and I could probably walk you through any problem. Sorry for the long post, but hopefully I may have at least helped someone else if not you. I kind of tend to go on and on when it comes to my tractor... Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|