Re: Buddy seat

Posted by Haas on March 10, 2004 at 05:32:16 from (12.65.49.180):

In Reply to: Buddy seat posted by rustyfarmall on March 09, 2004 at 22:36:41:

I made one for my MD using a bicycle kids jump seat from Wal mart, a piece of two inch rigid conduit, some heavy 6 inch angle iron, u bolts and other miscellaneous bolts. It's only good for kids up to 40 lbs. The bicycle seat had a harness in it. Angle iron is bolted to the axle holes. Conduit to the angle with u bolts. Another piece of angle at the top of conduit with U bolts. Seat is bolted to the top piece of angle. The conduit extends up so the kid has to straddle it and provides a something to hold on to. Could put a steering wheel on the top of conduit, but I just covered the end with a PVC pipe cap. Next time I have the tractor out, I'll take a picture and post it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Buddy seat Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]