Re: Re: Re: C123 engine overhaul max HP

Posted by SAmin NS on March 09, 2004 at 11:52:38 from (24.138.19.172):

In Reply to: Re: Re: C123 engine overhaul max HP posted by Stan(VA). on March 09, 2004 at 05:41:20:

I think you'll find that he can put in thinner sleeves to give a 3 1/4" bore. During the production of the Super A they started fitting the C-123 block (as in the Super C) around 1951 or 1952. They kept the bore at 3" by using very thick sleeves which my 1953 Super A has. So far as I know these blocks and all those following SA-1, 100, 130, and 140 can all be taken out to 3 1/4" with thinner sleeves. Hope this helps. SAm in NS

Follow Ups:

• Re: Re: Re: Re: C123 engine overhaul max HP Stan(VA). 13:10:36 03/09/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: C123 engine overhaul max HP Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]