Re: 706 repair

Posted by Scott on February 27, 2004 at 20:52:06 from (206.9.216.29):

In Reply to: 706 repair posted by ChadS on February 26, 2004 at 19:50:23:

I have a 706 gasser with the 263 that I only use to feed hay in the winter. I've had trouble with the intake manifold gasket going out. It's always the center port that leaks. The out side ports have rings that hold the gasket in place. I've had the manifold planed and the head is straight and I keep it torgued properly but still about every 2 years {300hrs}she leaks. The dealer machinic says its a very common problem and if you work it hard with it leaking it will burn or stick a valve. As I understand there is 2 types of gaskets thick and thin. The 263 uses the thin one. a peice of metal with 2 peices of gasket materal glued to it. Is there a better made gasket out there than the caseNH one?

Follow Ups:

• Re: Re: 706 repair ChadS 06:03:45 02/28/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 706 repair Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]