Re: insterment switches on 100

Posted by Hugh MacKay on February 24, 2004 at 03:34:57 from (209.226.247.19):

In Reply to: insterment switches on 100 posted by jeeper on February 23, 2004 at 19:09:26:

Jeeper: All 100's would have had lights from factory, the round one is indeed your light switch. If you look on front of tractor, right light mounted on top of steering box by the use of a stem into a hole in casting and held by a set screw. You will find a matching hole on left side for the left light. The rear light on these was usually mounted on a bracket coming from left seat support to rear of tractor. If you have an operators manual for tractor there is an excellent wiring diagram in the manual. The wires for the front lights should be in the harness going to the generator or alternator, which ever tractor has.

Follow Ups:

• Re: Re: insterment switches on 100 jeeper 18:41:00 02/24/04 (1)
  • Re: Re: Re: insterment switches on 100 Hugh MacKay 01:35:32 02/25/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: insterment switches on 100 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]