Re: Cost to Replace Clutch in 504

Posted by Gary on February 23, 2004 at 15:50:49 from (24.211.19.127):

In Reply to: Cost to Replace Clutch in 504 posted by carl on February 23, 2004 at 12:13:35:

Well I do it a little different. I made some screw tops for my jack stands and bolt them to the side rails of the tractor as close to the split point as possible. This will not matter if it is wide front or narrow. Put a good floor jack and support the rear half as close to the split point as possible. Then roll the back half away from the front. The large rear tires are good leverage to control this. I push a little on one tire and block it. then the other, and so on.
I don't know where you live, but, for a grand, I will p/u and del and put the clutch in and take you out to dinner too!! Gary

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Cost to Replace Clutch in 504 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]