Re: why my breaks keep locking up

Posted by Hoppy on February 23, 2004 at 06:42:40 from (167.142.225.254):

In Reply to: why my breaks keep locking up posted by Bryce Andreasen (Magnum) on February 21, 2004 at 21:53:12:

My experience with IH disk brakes is that after you rebuild them if you set them up too tight they will cause heat and expand and get tight just driving. Set them loose if you put on new pads until they have had time to break in and get some of the (fuzz) off the facings. Also check the splines, remove any rust, place a light coat of grease and then remove the grease, and the linings will move on the splines without hanging up. Not one of IH's best idea until they updated them with removable shims later sieries.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: why my breaks keep locking up Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]