Re: Re: MD

Posted by Roger WI on February 14, 2004 at 10:26:57 from (69.58.143.130):

In Reply to: Re: MD posted by Haas on February 14, 2004 at 05:55:13:

Haas, This write-up of yours reminded me of a problem I had with my MD. After adjusting the throttle friction brake per what I thought it said in the manual, I could hardly move the throttle. So I decided to loosen the tension ring on the back side. I had a hard time getting to that ring to loosen it as there is very little space between it and the block plus all the other obstructions. I finally used a needle nose Vise-grip, but it was difficult as I could only turn it about a 1/16 turn per bite of the wrench. Is there a better way to do that as I still need to loosen mine up some? Roger

Follow Ups:

• Re: Re: Re: MD Haas 14:05:13 02/14/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: MD Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]