Re: IH 786 For Tractor Pulling

Posted by scotc on February 02, 2004 at 23:57:01 from (162.39.3.127):

In Reply to: IH 786 For Tractor Pulling posted by Ron Midd on February 02, 2004 at 12:56:09:

I've only seen a 786 pull once, lots of weight there for the power. If you can change engines and want to pull lighter classes I'd go with an 06 or 56, use a dt360 or dt414 motor. I think later 786 came with the d360, may need a manifold change for a turbo, don't know for sure. One trick to the 756 is that they ran the d310, I think the only real difference between it and the d358 is the crank, if you are in a class that won't allow an engine change, the oil pans interchange. With a 966 the bigger motor is there just need to stick a turbo on it, and it'll also still weigh less than the 786. I don't know if you've got an open or ROPS tractor, I'm assuming its a ROPS. It also depends on how stock it has to stay or how stock it has to look.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 786 For Tractor Pulling Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]