450 hydraulic problem

Posted by Steve on February 02, 2004 at 19:43:36 from (152.163.252.227):

Moving snow tonight with my 450, I lost partial use of one lever. I have a hydraulic loader with 2 way cyls. on both the bucket and the lift. The 450 has a fast hitch and factory power steering. Here's the problem: The inside hydraulic lever is hooked to the bucket dump, the center is hooked to the lift. I could dump the bucket, but it wouldn't roll back unless I would raise or lower the loader at the same time. I just had to move the center lever just a little, and it would roll back. The oil level is at full. What's wrong? Valve troubles? Thanks Guys.

Follow Ups:

• Re: 450 hydraulic problem RB 05:46:26 02/03/04 (0)
• Re: 450 hydraulic problem Bill Evans 04:48:29 02/03/04 (0)

Post A Followup Name: E-Mail: Subject: Re: 450 hydraulic problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]