Re: Re: Cub Charging Problem!!!

Posted by DaveB on January 31, 2004 at 17:29:13 from (64.12.97.12):

In Reply to: Re: Cub Charging Problem!!! posted by dennis on January 31, 2004 at 15:10:05:

Thanks for your response. I've fully recharged the battery to 12.5 volts and with engine running at any speed it still reads 12.5volts DC. After running the Tractor for about 2 hours when I read across the battery it reads 7.5 Volts and I can't restart with the battery unless jump started. Actually what I'm confused about is what at this point is keeping the Tractor running after being jump started, the battery or generator?? I also replaced the coil with a 12 volt coil with no internal resistor. Can I pull the battery leads off while the Tractor is running and read across them without damaging anything??

Follow Ups:

• Re: Re: Re: Cub Charging Problem!!! Bob 19:07:49 01/31/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Cub Charging Problem!!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]