Cleaning a cylinder head options

Posted by clanger on January 26, 2004 at 12:59:59 from (80.176.149.33):

Just pulled the head on my 484.
The inlet ports on two of the cylinders are caked in carbon/burnt oil from poorly seating valves (hopefully not worn guides).
I've already scraped out most of the carbon/oil from the ports.
So, short of taking the head to be dipped, what are my options for finsihing off these ports and generally cleaning the whole of the head of oil ,etc. before grinding the valves back in and refitting to the block?

Follow Ups:

• Re: Cleaning a cylinder head options clanger 01:23:48 01/27/04 (0)
• Re: Cleaning a cylinder head options JB 18:27:06 01/26/04 (1)
  • Re: Re: Cleaning a cylinder head options clanger 01:39:58 01/27/04 (0)
• Re: Cleaning a cylinder head options Bob 15:51:41 01/26/04 (1)
  • Re: Re: Cleaning a cylinder head options the tractor vet 18:25:09 01/26/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Cleaning a cylinder head options Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]