Re: Painting questions

Posted by Dave_Id on January 23, 2004 at 13:16:05 from (67.0.155.28):

In Reply to: Painting questions posted by Chad on January 23, 2004 at 12:11:16:

First off, you can use the painting forum, and get into the archives on this site and spend the next week on the computer reading all the posts. Many guys have had good luck using a hardener with IH paint. This is probably the cheapest way to go... If you want to use a good 2-stage system, I'd recommend the Omni system from PPG... Fairly reasonable urathane paint. I have painted 3 tractors, one using IH, and two using the two stage PPG.. I wouldn't use IH paint again. I figure if you spend all that time prepping the project, why would you use substandard paint that will oxidize and fade in a couple of years when you can use urathane paint and clear coat system?

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Painting questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]