Re: Re: Re: Refurbishing ring gear teeth

Posted by rebuilder on January 20, 2004 at 19:04:24 from (66.228.102.123):

In Reply to: Re: Re: Refurbishing ring gear teeth posted by Hugh MacKay on January 20, 2004 at 18:13:50:

Mr.MacKay;

I mean no disrespect, but I have to side with Mr. Wlller. I have torn apart literally hundreds of tractors(we deal exclusively with I.H./Farmalls) and I cannot recall seeing the double sided ring of which you are describing. Every ring gear that I can think of has one side beveled to match the starter bendix, while the other side is not. The only turning we do or reccomend is the turn the ring gear 180 degrees as the clock turns, not turned to the other side. I write this, not to be contrary, but to try to clarify what my mind is telling me at the moment. It is something I will be looking into.

Follow Ups:

• Re: Re: Re: Re: Refurbishing ring gear teeth George Willer 20:22:41 01/20/04 (2)
  • Re: Re: Re: Re: Re: Refurbishing ring gear teeth Hugh MacKay 01:49:39 01/21/04 (1)
    • Re: Re: Re: Re: Re: Re: Refurbishing ring gear tee Farmallreid 11:50:27 01/21/04 (0)
• Re: Re: Re: Re: Refurbishing ring gear teeth Roger WI 19:57:07 01/20/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Refurbishing ring gear teeth Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]