Re: Ideal M farmstock puller

Posted by Jed on January 13, 2004 at 15:57:41 from (64.12.97.12):

In Reply to: Ideal M farmstock puller posted by LRP on January 13, 2004 at 15:01:00:

I have pulled an M for years. It has a 4 1/8" bore. It also has the slow 1st gear. We shaved a half inch off of the head. Pistons don't hit the plugs. It is close though. I have tried 16.9 & 18.4 tires. I don't have a lot of money in it and it has beaten some of the local large CI engines.
You can have all the power in the world if you can't put it on the track, you aren't going to pull well. It is a lesson in weight placement and your hitching point. Good Luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ideal M farmstock puller Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]